TAMCO    ¦    Thompson Architectural Metals Company

OUR SALES TEAM IS READY FOR YOUR CALL  (800) 248-3456                                                       
Thompson Architectural Metal Roofing is proud to be a partner of the 
Energy Star® Roof Products Program
  

Download TAMCO Manuals, Florida Approvals & Installation Guides Today!       

See a Video Presentation of our Company Products, Capabilities &  Facilities

Click on Image for Video

 

 

Gutter Accessories PG 2


Outside Box Miter

Outside Box Miters are the corner pieces made up of two pieces of gutter that are seamed together. These are the contractor favorite because they look good and are fast and easy to install. Good for 90 degree corners.

Outside Box miters should be riveted to the gutters and sealed with 12-1 Ruscoe Seam Sealant
.

Available in aluminum, in both 5" and 6" sizes.

     20 pieces per carton

 


K Style Inside Strip Miter

Inside Strip Miters require the two adjoining gutters to be cut on 45 degree angles. Strip miters are preferred by contractors who only want one seam per corner. Good for 90 degree corners.


As with all of our miters, we recommend the seam to be pop riveted together and sealed with 12-1 Ruscoe seam sealer
.

Inside Strip miters are available in aluminum in both 5" and 6".

20 pieces per carton

 


K Style Outside Strip Miter

Outside Strip Miters require the two adjoining gutters to be cut on 45 degree angles. Strip miters are preferred by contractors who only want one seam per corner. Good for 90 degree corners.

As with all miters, we recommend the seam to be pop riveted together and sealed with 12-1 Ruscoe seam sealer
.

Strip miters are available in aluminum in both 5" and 6".

     20 pieces per carton

Gutter End Caps

End caps close off each end of a gutter. They are punch locked to the ends of the gutter with crimpers and sealed with gutter sealer.


Gutter Spikes

Rain gutters are often held in place by a spike and ferrule: A giant nail is driven into the front of the gutter where it passes through an aluminum sleeve (the ferrule), through the rear of the gutter, and into the fascia and rafter end.

7" or 8" Spikes available In White or Brown

500 per carton


Gutter Ferrules

Ferrules are used as a spacers over the gutter screw or gutter spile to assure correct gutter width.

 Use one spike and one ferrule every 24" of gutter run

Available in 5" or 6"

500 per carton

 



POP Rivets

At TAMCO we carry aluminum rivets.  

The mandrel part of the rivet measures at 7/16" for the #44

Colors available: White,Bronze, Colonial Gray, Antique  Ivory, Royal & Musket Brown 

100 per pack-1000 per box

 

Gutter Touch Up Paint

All aluminum gutters, downspouts, end caps, elbows, valley shields and downspout straps are prepainted with factory baked-on enamel paint. Touch-up paint is used as needed.

12oz. size

12 per carton